Do I Need a USDOT Number for a Pickup or Box Truck?
Short answer: it depends on the weight rating and what you do with the truck. Here is how to tell in a few minutes.
When a USDOT number is generally required
These are the three triggers in the federal rules. If any one of them describes your operation, you need a USDOT number before you drive for business.
10,001 lbs or more
A USDOT number is generally required when the vehicle you operate in interstate commerce has a gross vehicle weight rating (GVWR) of 10,001 lbs or more, or a gross combination weight rating (GCWR) of 10,001 lbs or more when you pull a trailer.
Placarded hazmat
If your vehicle hauls hazardous materials that require placarding, a USDOT number is required no matter how much the vehicle weighs.
Passengers for pay
A USDOT number is also generally required for vehicles designed or used to carry 9 or more passengers (including the driver) for compensation, or 16 or more passengers (including the driver) regardless of compensation.
Pickups and hot-shot setups
The truck by itself is rarely the problem. The trailer is. Federal rules look at the gross combination weight rating, which is the rating of the truck and trailer together, not the weight of an empty pickup on its own.
A one-ton dually pickup is often rated around 13,000 to 14,000 lbs. Add a gooseneck or bumper-pull trailer rated at 10,000 to 14,000 lbs and the combined rating lands well past 10,001 lbs. That is why most hot-shot pickup plus trailer setups need a USDOT number, even though the truck looks nothing like a semi.
A half-ton pickup pulling a light utility trailer may stay under the threshold. Do the addition with the ratings on the stickers, not with a guess.
Box trucks, including 26-footers
Most box trucks sold for freight and moving work are already over the line. A typical 26-ft box truck has a GVWR of 25,999 lbs, and even the smaller 16-ft to 20-ft cutaway chassis usually come in between 14,000 and 19,500 lbs. All of those are above 10,001 lbs.
A light-duty cargo van or a small box truck on a 2500-series chassis may be rated below 10,001 lbs. The only reliable answer is the rating printed on the vehicle, so start there.
Where to find your GVWR
Open the driver's door and look at the jamb between the door and the frame. You will find a certification label, usually white with black print, that lists the GVWR and, on many trucks, the GCWR.
The same rating is often repeated in the owner's manual and on the trailer's own label for a trailer. The door jamb sticker is the one inspectors and state offices read, so use it.
Add the truck's GVWR to the trailer's GVWR to get your combined rating. If that total reaches 10,001 lbs, you are in USDOT number territory.
What if you never leave the state?
The federal thresholds above apply to interstate commerce. Several states also require a USDOT number for intrastate carriers, often once the vehicle reaches a certain weight, and some add their own state number on top. If your box truck or hot-shot rig never crosses a state line, confirm the rule with your state before you decide you are exempt.
Not sure? Check with us
Tell us the truck, the trailer and where you run. We will tell you whether you need a USDOT number, and what to do next if you already have one.
Call 702-988-9990
Pickup and box truck questions
Does a half-ton pickup need a USDOT number?
On its own, usually no. A half-ton pickup with a GVWR around 7,000 lbs stays under the 10,001 lb threshold. The number is required when the vehicle, or the combined weight of the pickup and the trailer it pulls, reaches 10,001 lbs or more and the operation crosses state lines.
My pickup and trailer are 12,000 lbs combined. Do I need a number?
In most cases yes. If the combined rating is 10,001 lbs or more and you are operating in interstate commerce, a USDOT number is generally required. That is the usual situation for hot-shot rigs, even ones that look small next to a class 8 tractor-trailer.
Does a box truck used only in town need one?
Not for federal interstate rules, since purely intrastate operations fall outside those thresholds. Several states, however, do require a USDOT number for intrastate carriers above a certain weight, so check your state's rule before you assume you are exempt.
How do I get a USDOT number?
You register with FMCSA by filing the MCS-150 form. You will need your business name, address, EIN or Social Security number, and vehicle information. USAFE Services files that registration for you and sends you the confirmed number.
For official rules see FMCSA.dot.gov. USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.