Minimum Brake Lining and Pad Thickness for CMVs
49 CFR 393.47(d) sets minimum lining thickness. On steering axles with air drum brakes it is 3/16 inch at the shoe center for a continuous strip, 1/4 inch for a shoe with two pads, or the wear indicator; 1/8 inch for air disc; and 1/16 inch for hydraulic and electric brakes.
Figures and rules on this page were checked against the official sources listed below as of November 11, 2026. Rules change; confirm with the official source before you file.
Non-steering axles
Air-braked CMVs may not run with drum linings under 1/4 inch (or to the wear indicator) or disc pads under 1/8 inch. Hydraulic or electric brakes need at least 1/16 inch.
Matching components
Service and spring brake chambers on each end of an axle must be the same size, and slack adjusters on each end must have the same effective length.
About USAFE Services
USAFE Services is a private filing company and not a government agency. We are registered with FMCSA as a Supporting Company, Filer #5191541. Questions? Call 702-988-9990.
Need this filed for you?
USAFE Services handles the filing end to end, or call and we will walk you through what your record needs.
Frequently asked questions
Related pages
Sources
USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.