Securing Concrete Pipe (393.124)
49 CFR 393.124 applies to concrete pipe on flatbeds and lowboy trailers. The aggregate working load limit of all tiedowns on a group of pipes must be at least half the total weight of the pipes, and timber blocking must be at least 4 by 6 inches.
Figures and rules on this page were checked against the official sources listed below as of November 11, 2026. Rules change; confirm with the official source before you file.
Blocking layout
One block extends at least halfway from the center toward each end of the pipe, with two pieces on the opposite side at each end, placed firmly and secured so it cannot slide out.
Exceptions
Pipe bundled tightly into a rigid unit that will not roll, or pipe in a sided vehicle or container, follows the general rules.
Where the general rules fit
This commodity rule works alongside the general cargo securement rules in 393.100-393.114 and the driver's cargo inspection duties in 392.9.
About USAFE Services
USAFE Services is a private filing company and not a government agency. We are registered with FMCSA as a Supporting Company, Filer #5191541. Questions? Call 702-988-9990.
Need this filed for you?
USAFE Services handles the filing end to end, or call and we will walk you through what your record needs.
Frequently asked questions
Related pages
Sources
USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.