Securing Flattened or Crushed Vehicles (393.132)

49 CFR 393.132 bars synthetic webbing for securing flattened or crushed vehicles, except to connect wire rope or chain to anchor points, and the webbing may never touch the cars. Loads ride on vehicles with full-height containment walls on four sides, or walls on fewer sides plus tiedowns per stack.

Figures and rules on this page were checked against the official sources listed below as of November 11, 2026. Rules change; confirm with the official source before you file.

Wall and tiedown combinations

Four walls; three walls plus at least two tiedowns per stack; two walls (front and rear) plus at least three tiedowns per stack; or at least four tiedowns per stack.

Loose parts

The rule adds requirements for containing loose parts in the load.

General rules still apply

The commodity rule adds to the general cargo securement rules in 393.100-393.114, including working load limits and the driver's cargo checks under 392.9.

About USAFE Services

USAFE Services is a private filing company and not a government agency. We are registered with FMCSA as a Supporting Company, Filer #5191541. Questions? Call 702-988-9990.

Need this filed for you?

USAFE Services handles the filing end to end, or call and we will walk you through what your record needs.

Frequently asked questions

USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.