Safety Chain and Tow-Bar Rules for Full Trailers
49 CFR 393.70(d) requires every full trailer, and every converter dolly used to convert a semitrailer to a full trailer, to be coupled to the towing vehicle with one or more safety devices that keep it from breaking loose if the tow-bar fails or disconnects. If the safety device is chains or cables, the towed vehicle must have two of them, and they must meet the strength and attachment rules in the section.
Figures and rules on this page were checked against the official sources listed below as of November 11, 2026. Rules change; confirm with the official source before you file.
Tow-bar
Under 393.70(c), a full trailer must have a tow-bar that is structurally adequate for the weight, properly mounted, and allows adequate articulation.
Attachment point
The safety device may not attach to the pintle hook or other device the tow-bar uses, except as the rule allows.
Related
Lighting and brakes on towed units have their own Part 393 rules.
About USAFE Services
USAFE Services is a private filing company and not a government agency. We are registered with FMCSA as a Supporting Company, Filer #5191541. Questions? Call 702-988-9990.
Need this filed for you?
USAFE Services handles the filing end to end, or call and we will walk you through what your record needs.
Frequently asked questions
Related pages
Sources
USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.