Warning Triangle Placement for Stopped Trucks

When a CMV stops on the traveled portion or shoulder of a highway for anything other than a necessary traffic stop, 49 CFR 392.22 requires the driver to turn on the hazard flashers immediately and, as soon as possible and within 10 minutes, place warning devices.

Figures and rules on this page were checked against the official sources listed below as of November 11, 2026. Rules change; confirm with the official source before you file.

General placement

One device on the traffic side, 4 paces (about 10 feet) from the truck toward approaching traffic; one 40 paces (about 100 feet) behind in the center of the lane or shoulder the truck occupies; and one 40 paces (about 100 feet) ahead, away from approaching traffic.

Flashers

Flashers stay on until the devices are out and are used again while the devices are picked up. They can supplement, but not replace, the devices.

Required equipment

393.95(f) requires three bidirectional emergency reflective triangles meeting FMVSS 125, or at least 6 fusees (with extra fusees as needed for 392.22), or other permitted devices.

About USAFE Services

USAFE Services is a private filing company. We are registered with FMCSA as a Supporting Company, Filer #5191541. Questions? Call 702-988-9990.

Need this filed for you?

USAFE Services handles the filing end to end, or call and we will walk you through what your record needs.

Frequently asked questions

USAFE Services is registered with FMCSA as a Supporting Company, Filer #5191541.